> Terms of Use     

HOME PRODUCTS TRACEABILITY Friendly LINK OVERSEAS AGENCY

HOME > PRODUCT Top > SPARK TESTER

Spark Tester



HIGH FREQUENCY SPARK TESTER (SM-15HF) [Go to Spec. List]
高周波スパークテスター
  • High frequency sine wave spark tester, SM-15HF, accomplish considerable reliability in spite of high speed wire or very small defect.
  • Good appearance stand (SM-15HFS)
  • Compact panel (400X80)
  • Rigid one frame body-stainless steel (SM-15HFB)
  • Easy to repair and usage
  • Corrosion free stainless steel electrode
  • Disassembled electrode can be installed anywhere and easy to move up-down adjusting wire center.

AC 50Hz 60Hz 600Hz SPARK TESTER[Go to Spec. List]
AC スパークテスター
  • This tester is general device that detect the insulation
    defect at cable manufacturing process.
    When the defect point(bare wire, pin hole, dust, scar) pass through the tester, it can find out insulation defect point.
  • * Option : Print out insulation defect point, line speed, time, wire, length by adopting memory and / or printer.

DC HIGH VOLTAGE MULTI SPARK TESTER[Go to Spec. List]
DC高電圧スパークテスター
  • SM-3100ST, be suitable for communication cable
    standing machine, is used for detecting pin-hole. broken wire in front of 100 or 200 pair of standing.
    This tester can check 100 or 200 lines simultaneously and even only one line's defect is detected, alarm and stop the line.
    After the line stop, can repair the cable with local tester.


[Go to Top This Page]

High Friquency SPARK TESTER -- Specifications

[Back]

Type High Friquency SPARK TESTER
Model SM-15HF
Output Voltage 100 〜 15000V
Output Friquency 2500 - 3500Hz depending on load capacitance
Test Type Bred chain
Fault Counter 4 digits electrode mechanical counter
Voltage indication 3 digits LED
Load Current Resistive 4mA, Capacitive 35mA
Line Speed Max. 3000rpm
Fault indication LED lamp and output contact
(Optionally available, output contact alarm accessory )
Reset Mode Continuous alarm output
Manual reset recover stop
Contact Outputs Spark faults relay 250V 5A
Excess faults relay 250V 5A
Push Button Switch Adjustable excess fault time. 1 - 150msec
Interface Be able to adjust output voltage and reset from our of tester.
Data Print Be able to print out defect point, line speed, length with connecting length counter and also can be applied to production management.
Input Power Transformer 110/220V AC 50/60Hz 1Phase 200VA
Weight Control Unit + Detector - 15.5kg

[Go to Top This Page]

AC 50Hz 60Hz 600Hz SPARK TESTER-- Specifications

[Back]

MODEL SIZE
(W) x (D) x (H) mm
DIAMETER RANGE TEST VOLTAGE ELECTRODE
LENGTH
SM-15ST40 500 x 300 x 1170 20mm 15kV 50/60Hz 350mm
SM-15ST80 500 x 400 x 1200 40mm 15kV 50/60Hz 250mm
SM-15ST120 600 x 480 x 1250 80mm 15kV 50/60Hz 250mm
SM-15ST180 600 x 600 x 1250 150mm 15kV 50/60Hz 300mm
SM-30ST80 600 x 480 x 1250 40mm 30kV 50/60Hz 250mm
SM-30ST120 600 x 480 x 1250 80mm 30kV 50/60Hz 240mm
SM-30ST180 600 x 600 x 1250 150mm 30kV 50/60Hz 240mm
SM-50ST120 800 x 800 x 1250 80mm 50kV 50/60Hz 220mm
SM-50ST180 800 x 800 x 1250 150mm 50kV 50/60Hz 220mm
SM-50STR300 800 x 1300 x 600 150mm 50kV 50/60Hz 300mm
SM-15ST40-H 500 x 400 x 1250 40mm 15kV 600Hz 200mm
SM-15ST80-H 600 x 480 x 1250 80mm 15kV 600Hz 200mm
SM-15ST40-HMP 500 x 400 x 1250 40mm 15kV 600Hz 200mm

[Go to Top this page]

DC High Voltage MULTI SPARK TESTER -- Specifications

[Back]

Type DC High Voltage MULTI SPARK TESTER
Model SM-3100ST
Output Voltage DC 0 - 3kV
Volt Meter Display 3digits LED 3 1/2 0 - 3.5kVDC Accuracy ±2% of full scale
Fault Indicator 4digits counter. 104EA LED lamp or 208EA LED
Fault Resolution 25milliseconds
Output Control Relay contacts rated at 10amperes. Stop delay counter.
Input power 100 / 200 / 240VAC 50/60Hz single phase 1kVA


MODEL Pair Line MAX. Voltage
SM-3054ST 54 P 3000VDC
SM-3100ST 104 P 3000VDC
SM-3200ST 208 P 3000VDC
SM-5100ST 104 P 5000VDC
SM-15SD40 1 P 15000VDC
SM-30SD80 1P 30000VDC
SM-15FLAT FLAT Cable
SM-3100STP Print data out

[Go to Top this page]

[Back]