> Terms of Use     

HOME PRODUCTS TRACEABILITY Friendly LINK OVERSEAS AGENCY

HOME > PRODUCT Top > OM Series

OM Series

  • Reverse Detector (OM-01)
    This detector can output alarm by detecting reverse motion of winding direction in winding system and can be installed on DIN rail.
  • A/B Phase Divider (OM-02)
    This device is to obtain 1/10 and 1/100 deviding output of single phase or A/B phase input pulse and can be installed on DIN rail.
  • 2-Channels Distributor (OM-03)
    This device has 2 channel input and 5 output for each pulse input and can be installed on DIN rail.

Specifications



Type Reverse Detector
Model OM-01
CAD file dxf       pdf
Summary This detector can output alarm by detecting reverse motion of winding direction in winding system and can be installed on DIN rail.
Power supply DC+12V/0.5A(Changeable by option)
Reverse count Setting 3-digit digital switch
Contact output 1-a contact, 590ms one shot, AC240V 1A(Resistance load)
Pulse input A/B phase pulse
Max. frequency 5kHz(Changeable by option)
Display Power on LED and Reverse detecting LED
Inhibit input Short-circuited terminal or 'L' level input to terminal
(DC5V/CMOS level)
Outside dimension 100(W) * 70(H) * 112(D)[mm], Installing on DIN rail available

Type A/B Phase Divider
Model OM-02
CAD file dxf       pdf
Summary This device is to obtain 1/10 and 1/100 deviding output of single phase or A/B phase input pulse and can be installed on DIN rail.
Power supply DC+12V/0.5A(Changeable by option)
Dividing ratio 1/10 and 1/100
Output Open collector output
Pulse input A/B phase pulse
Max. frequency 10kHz(Changeable by option)
Single/2 phase changing Changing by jumper on internal PCB
Outside dimension 100(W) * 70(H) * 112(D)[mm], Installing on DIN rail available

Type 2-Channels Distributor
Model OM-03
CAD file dxf       pdf
Summary This device has 2 channel input and 5 output for each pulse input and can be installed on DIN rail.
Power supply DC+12V/0.5A(Changeable by option)
Input 2 channels(Pulled-up by 4.7kohm resistances)
Output 5-outputs/1-channel(Open collector output)
Max. frequency 10kHz(Changeable by option)
Outside dimension 100(W) * 70(H) * 112(D)[mm], Installing on DIN rail available


[Go to top this page]

[Back]