> Terms of Use     

HOME PRODUCTS TRACEABILITY Friendly LINK OVERSEAS AGENCY

HOME > PRODUCT Top > Eccentricity Monitor


   Eccentricity Monitor



OutLine
  • This system measures the eccentricity amount of the cable, processing the data obtained by the measurement of the center position of the cable by laser and of the one of the inner cable conductive material by magnetism.
    Select most suitable model among wealth of models.
Features
  • Most suitable model can be selected can be selected for the covered cable from the ultrafine to the larger diameter.
  • Online operation with external computer through interface.  
  • Non-contact measurement of eccentricity amount by a magnetic detection circuit.
  • Few portions adopted driving method - Easy maintenance.
  • Non-contact masurement - No harm on cables.
  • Touch panel computer adopted to Display Unit and various graphic displays obtained by finger-touch panel operation.
  • By RS-485 interface, intergrated data management can be done.(Option)


EM-302、EM-PC2

Scanner Unit EM-302             Display Unit EM-PC2
EM-303B EM-304A EM-304B

Eccentricity Monitor -- Specifications


<Specification>
Available cable Electric wire that covered insulation thing to round conductor
Operational circumferenital condition 5〜40℃、35〜85%RH(without condensation)
Analog Output The outside diameter deflection (average, X axis, and Y axis) and eccentrics (X axis and Y axis) are -10V-+10VDC.
A mean outside diameter, the synthesis and the eccentric amounts, and the synthesis and the eccentric corners are 0V-+10V.
Alarm output Outside diameter upper limit, outside diameter lower limit, Exceeded eccentricity amount
(abnormal position)
file output The measurement data can be recorded in CF and the USB memory, etc.
RS-232C Output rate 19200 bps Recommendation
RS-485 Function Option
display unit EM-PC2 Panel PC(316(W)x256(H)x49.2(D) 3.5kg)
Ground resistance Less than 100Ω
AC power AC90〜240V 50/60Hz less than 50VA

Model EM-302 EM-303B EM-304A EM-304B
System configuration Scanner unit
(EM-302)
Scanner unit
(EM-303B)
Scanner unit
(EM-304A)
Scanner unit
(EM-304B)
Control unit
(EM-200)
Control unit
(EM-204)
Control unit
(EM-200)
Display unit
(EM-PC2)
excitation unit
(EM-25)
excitation unit
(EM-35)
Built in EM-304A excitation unit
(EM-125)
dxf format
CAD file
Scanner unit
(EM-302)
Scanner unit
(EM-303B)
Scanner unit
(EM-304A)
Scanner unit
(EM-304B)
Control unit
(EM-200)
Control unit
(EM-204)
Control unit
(EM-200)
excitation unit
(EM-25)
excitation unit
(EM-35)
--- excitation unit
(EM-125)
excitation unit
(EM-800)
--- --- ---
pdf format
CAD file
Scanner unit
(EM-302)
Scanner unit
(EM-303B)
Scanner unit
(EM-304A)
Scanner unit
(EM-304B)
Control unit
(EM-200)
Control unit
(EM-204)
Control unit
(EM-200)
excitation unit
(EM-25)
excitation unit
(EM-35)
--- excitation unit
(EM-125)
excitation unit
(EM-800)
--- --- ---
Available cable conditions Finished cable diameter (mm) 0.3〜5[*1] 0.3〜15 0.8〜30 0.8〜45
Induction diameter (mm) 0.1〜3[*2] 0.1〜10 0.5〜20 0.5〜35
Measurement accuracy
(Outside Dia.) [*3]
±0.002mm
±0.002mm ±0.005mm ±0.005mm
Measurement accuracy
(Eccentricity)
±0.01mm[*4] ±0.015mm[*4] ±0.02mm[*5] ±0.03mm[*5]
External dimention
[mm]
Scanner unit 158(W)×143(H)×60.4(D) 225(W)×260(H)×60(D) 526(W)×530(H)×253(D) 606(W)×606(H)×353(D)
Control unit 202(W)×82(H)×100(D)
display unit 316(W)×256(H)×49.2(D)
excitation unit 119.2(W)×124.6(H)×35.8(D) 148.2(W)×227.1(H)×72.4(D) --- 290(W)×275(H)×203(D)
119.3(W)×124.6(H)×144(D)
[EM-800]
--- --- ---
weight Scanner unit 1.9kg 6kg 38kg 57kg
Control unit 1.9kg
display unit 3.5kg
excitation unit 0.8kg
2.4kg --- 15kg
2.0kg[EM-800] --- --- ---

<Excitation unit / Control unit / Display unit Outline


[*1]Available up to 5mm in a specific condition.
[*2]Available up to 3mm in a specific condition.
[*3]This condition is applied to each X axis and Y axes.
[*4]This measurement accuracy is guaranteed only when the conditions ; measuring outside dia.    to be less than 5mm and center position of the cable exists within ±2mm, are satisfied.
[*5]This measurement accuracy is guaranteed only when the conditions ; measuring outside dia.    to be less than 5mm and center position of the cable exists within ±2mm, are satisfied.

**Excitation unit EM-800, more powerful than EM-25, is available as an option.
   Use it at the appropriate operating environment.

[Go to Top this page]

[Back]