> Terms of Use     

HOME PRODUCTS TRACEABILITY Friendly LINK OVERSEAS AGENCY

HOME > PRODUCT Top > AD-50

AD-50

  • Counting Event Printer (AD-50):
    OUTLINE
    The AD-50 printer is ideal recording device for quality control operation on an electric cable production line. It can continuously print messages and distances of produced electric cable when receiving alarm signals from laser micrometer, surface variation detector, spark tester, cable capacitance monitor, joint-detector, disconnection detector and a great number of other instruments.

    FEATURES
  • A total of ten messages can be input.
  • Preset Setting (forecast,maximum) of count values can be made.
  • Scaling of counting pulse can be made.
  • Various setting of time, date, etc, can be battery backed up for a long-term.
  • Time, date and lot numbers can be printed out.
  • Correct printing-out of count values can be made by setting correction distance of each messages.
  • RS-232C is equiped as standard.
  • Super compact size and low cost.

Specifications


Type Counting Evint Printer
Model AD-50
CAD file dxf      pdf
Counting value
display
6-digit, 2-color(Green/Red), 7-segment LED.
Zero suppress is available.
Input clock for
Measuring
Single/Double(A,B) phase pulse input is available,
Up/Down counting is available
Clock Edge Rising or Falling
Clock Rate Free setting between 0.00001m/pulse - 999999m/pulse
Max. clock
frequency
2kPPS or 100PPS
Count sensor
power supply
+12V Max70mA
No. of Event Message 10 (8 Events + RESET & PRINT)
Event input Backside terminal block
RESET Event input Backside terminal block & front panel push switch
PRINTING Event input Backside terminal block & front panel push switch & RS-232C
Message
Change method
By RS-232C interface
Counting Value PRESET1 6 digit
Counting Value PRESET2 6 digit
Initial Setting 6 digit
Lot No. setting 4 digit. Automatic increment is available by PRESET.
Event distance
compensation
Correct count value is abailavle by Evevt input distance calibration setting for each event.
PRESET output Count value display or 7-segment charges from Red to Green,
Front panel LED, RS-232C,
Relay contact("a" contact, AC250V Resistance load 2A)
Printer Thermal type, 20 digit, 58mm wide
Out-of-paper
signal
Front panel LED, relay contact, RS-232C,
Relay contact ("a" contact, AC250V Resistance load 2A)
Timing function Year/Month/Date and Hour/Minute
Battery back-up Back-up the setting of counting, timing, etc.
(Back-up hours ; 1 month or more at full charge)
Communication RS-232C interface (Baud rate:300 - 19200bps)
Power Source AC100 - 240V Free power supply 50/60Hz, 8VA or less
Outside
dimention
144(W) * 144(H) * 191(D)[mm]
Weight 2.8kg
Ambient condition Temperature:0 - 45 degree centigrage, Humidity:35 - 85%RH(No condensation)


* What is the difference between AD-50 and AD-50E ?

* Please read before using the printer


[Go to PageTop]

[Back]